Step-by-Step Guide to Installing a Toilet Flange Extension for a Flawless Fit

How to Install a Toilet Flange Extension

Installing a toilet flange extension is a common task when dealing with issues such as uneven floors, low-set toilets, or outdated plumbing. This guide will walk you through the process step by step, ensuring a successful installation that will keep your bathroom functioning smoothly.

Materials Needed:

Before you begin, gather the following materials:

– Toilet flange extension kit
– Adjustable wrench
– Pliers
– Screwdriver
– plumber’s putty
– Caulk
– Chisel
– Hammer
– Level
– Safety goggles and gloves

Step 1: Remove the Old Flange

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain any remaining water.
3. Unscrew the bolts that secure the toilet to the floor.
4. Remove the toilet and set it aside.
5. Using a chisel and hammer, carefully remove the old flange from the floor.
6. Clean the area where the new flange will be installed.

Step 2: Install the New Flange

1. Check the new flange extension kit to ensure all parts are present.
2. Attach the flange extension to the existing flange, if necessary.
3. Place the new flange on the floor, ensuring it is level.
4. Mark the location of the bolt holes with a pencil.
5. Drill holes for the bolts, if needed.
6. Insert the bolts through the flange and into the floor.
7. Tighten the bolts with an adjustable wrench.

Step 3: Apply Plumber’s Putty and Caulk

1. Apply a generous amount of plumber’s putty around the base of the flange.
2. Push the toilet bowl over the flange, ensuring it sits evenly.
3. Wipe away any excess plumber’s putty with a damp rag.
4. Apply a bead of caulk around the base of the toilet bowl to seal the gap between the bowl and the floor.

Step 4: Reinstall the Toilet

1. Reattach the toilet to the floor using the bolts and an adjustable wrench.
2. Tighten the bolts securely, but do not overtighten.
3. Reconnect the water supply to the toilet.
4. Flush the toilet to check for leaks.

Step 5: Final Checks

1. Inspect the toilet for any leaks or gaps.
2. Ensure the toilet is level and stable.
3. Clean up any mess or debris from the installation process.

Congratulations! You have successfully installed a toilet flange extension. This will help to ensure a secure and leak-free toilet installation for years to come.